Three FlowStop barriers standing across a garage door on a flooded street in Corte Madera, California, with floodwater in the street in front of them

Keep floodwater out, before the next king tide.

Custom-made inflatable flood protection barriers for homes: garage doors, front doors, sliding patio doors and basement entries.

  • Built for how California floods: king tides, atmospheric rivers, creeks and rivers that come up fast.
  • One person. 5 minutes. No tools, no contractors, and no permits.
  • A reusable home flood prevention system: deflate, roll up, store it in a bag, ready for the next season.
Step 1 of 4

What do you need to protect?

🔒 Free, no-obligation quote · Takes under 2 minutes
Not sure yet? See FlowStop in action ↓
Three FlowStop barriers standing across a garage door on a flooded street in Corte Madera, California, with floodwater in the street in front of them
Corte Madera, California — November 13, 2026.

King tides are already on the calendar.
Make sure you're ready before they arrive.

A FlowStop barrier being inflated in a doorway
Built for one opening: yours. Three to four weeks from approved quote to the day it's standing in your doorway.
Dec 22–25Jan 20–23

NOAA tide predictions for the California coast.

Every FlowStop barrier is built for one specific opening: 3 to 4 weeks from your approved quote to delivery, which is fast for something made to measure. Measuring and the quote come first, and they’re free.

➡️ To be protected for the December 22–25 window, order by November 24, 2026.

See it in Action

Watch FlowStop deploy in under 5 minutes.

🏢 Managing a condo building or a commercial property? See what we do for buildings ↓

Built for Real Flooding. Designed for Peace of Mind.

Now manufacturing in New Hampshire

Since 2026, FlowStop has been manufacturing in its own factory in New Hampshire. FlowStop was invented in France in 2019, brought to market in 2021, and opened its US office in 2024. The technology is patented and backed by more than five years of engineering R&D.

One person. 5 minutes.

No tools and no contractors. Deploys in under 5 min: just inflate and your home is protected, before the water arrives. Then it rolls up and goes back in its bag.

Flawless Fit, Every Single Time

Because no two doorways are exactly alike, FlowStop barriers are custom-manufactured to match your building perfectly. Once inflated, our heavy-duty seals adapt to any unevenness or texturing on your walls, delivering a watertight seal that traditional rigid panels simply can't achieve.

Tested by an independent lab

FlowStop door barriers were tested by the National Research Council of Canada in 2025, with waves and debris. The result: 10× less leakage than the US flood barrier standard allows. No door barrier tested sealed tighter. It has also kept water out of real homes during Hurricane Helene in Florida.
Read the NRC report →

The Water Came. It Didn't Get In.

🔬 Independently lab-tested: National Research Council of Canada, 2025 · Read the report
★★★★★
"I unboxed them and inflated them as per instruction. I left them inflated overnight. They were fine… They look very well made and I believe durable. The battery powered pump worked very well… I could handle all the barriers by myself. The garage barrier was a challenge. I am 78 years old and work at a slower pace. After all is said, your product is living up to as advertised."
— Everett, Beaufort, South Carolina
A FlowStop barrier sealing a below-grade garage door at the bottom of a sloped driveway
José's own garage, at the bottom of the ramp where the water runs down.
★★★★★
"I bought the FLOWSTOP inflatable flood barrier to protect my basement from potential flooding. I don't regret it, as the water table has since risen and caused a flood. The flood barrier prevented water from entering the basement. Installation is easy."
— José R., France
★★★★★
"The experience with Richard, the local sales rep, has been nothing short of outstanding! From the demo in our community, to coming to our home to measure the openings to be protected, following up in the delivery… He went over everything in great detail and was able to answer all of our questions. He went above and beyond to make sure we are a happy customer."
— John O., Hudson, Florida

FlowStop Outperforms Traditional Flood Barriers

FlowStop was designed with one mission : easy enough to actually use it.

Rigid Panels
FlowStop
Deploys solo, no tools
❌ Needs 2+ people
✅ 1 person, 5 min
Seals on uneven surfaces
❌ Gaps left behind
✅ Inflates to fit perfectly
Stores at home
❌ Garage-sized unit
✅ Rolls up, fits in a bag
Permanent vs Seasonal
📅 Permanent install, left in place year-round
🌧️ Up to 30 days, store when not in use
🏗️ Looking for something bolted in place year-round? A permanent rigid system is probably the better fit. FlowStop is made to be deployed for a season and stored the rest of the year.

FAQ

Everything you need to know before your free quote.
FlowStop barriers are precision-custom-made to fit your exact door, window, or garage frame. When inflated, the barrier forms a high-pressure watertight seal inside the opening, stopping floodwater before it ever gets a chance to enter. No gaps, no leaks, no compromise.
No, and we'd rather say so now. FlowStop seals an opening: a garage door, a front door, a slider, a basement entry. It does not stop water rising through a floor slab, a foundation crack, or backing up out of a floor drain. That last one matters on the coast: during a king tide, storm drains can't empty into a bay that is already at its highest point, so they back up. Every FlowStop ships with a toilet backflow balloon for exactly this, and if your home sits in a low spot you should pair the barrier with a backflow valve and a sump pump. If your water comes in at the door, which is the usual case, the barrier is the fix.
3 to 4 weeks from your approved quote to delivery, which is fast for something cut and sewn for one specific opening. That's why the king tide dates are useful: to be protected for the December 22–25 window, the order has to be placed by November 24, 2026.
Yes, and it's one of the most common jobs we do, not a special case. Water running down a driveway arrives at the garage door first and with some force, which is exactly what an inflatable barrier handles better than a rigid panel: it presses outward against the frame and the floor instead of sitting in a track. Single and double garage doors are both standard sizes for us.
All three are standard. Sliding patio doors onto a deck or a yard, French doors, basement entries, side doors: we measure the opening and build to it. Tell us every opening at or below street level when you request your quote: water takes the easiest way in, and it's usually not the front door.
Yes. A king tide brings sea water, and the barrier handles it the same way it handles fresh water. The seal works on the opening, not on what the water is made of.
Between 29.5" and 42.5" of standing water, depending on the barrier. The barrier itself is taller than the water it holds: a 31.5" barrier holds 29.5", a 47.5" barrier holds 42.5". Which heights are available depends on how wide your opening is, so wide openings like garage doors start higher. When you request a quote we measure your openings and tell you exactly what each one can hold.
Under 5 minutes. Inflate, position, and you're protected: no tools and no contractors. The rest of the year it rolls up and goes back in its bag.
About 7 lbs for a standard door. Light enough to store in a closet and deploy solo when flooding threatens.
Yes. FlowStop is built to last for years. Deflate, roll up, and store compactly between uses, ready to deploy again when the next flood threatens.
FlowStop pricing starts at $90 per square foot. Because every barrier is custom-built to your exact openings, your final price depends on the size and number of doors, garages, or windows you protect. Your free quote gives you the exact cost upfront : no surprises, no obligation.
FlowStop needs no permit, and the barrier is stored away the rest of the year, so nothing changes the look of the property. That is usually what makes it straightforward with a board or a landlord. On a standard door or window, the barrier seals against the frame itself. Wider openings, a garage door in particular, need some fitting, and we tell you exactly what yours need before you order, never after.

Protect Your Home From Flooding in 3 Steps

1

Free on-site assessment, usually the same week

One of our people comes out, walks your garage door, your entries and anything below street level with you, and takes the measurements. We map where water gets in, confirm the barrier will fit, and give you a cost range. The visit and the measurements are free. If you are a long way from our California team, we can start with a short video call while you wait for the visit.

2

Your quote, built from your numbers

You get a written quote based on the exact openings we measured: the barrier sizes, the price and the lead time, with no obligation. Your barrier is built from these numbers, so it is the step we don’t rush, and nothing is ordered until you approve it.

3

Build, delivery and a dry run

Once your quote is approved, your barrier is manufactured to your measurements, 3 to 4 weeks, then delivered. We walk you through deploying it and storing it, so the first time you put it up isn't the morning of a flood.

Built to Fit. See Every Size.

FlowStop makes flood barriers for homes, custom-built for your exact opening: single and double garage doors, front doors, French doors, sliding patio doors, windows and basement entries, any width.

A garage door flood barrier is the most common FlowStop build in California, and a double garage at the bottom of a sloped driveway is a standard job. On most California homes the garage is both the widest opening and the lowest point, which is why it's where we start.

Because each barrier is cut and sewn for your opening, allow 3 to 4 weeks between your approved quote and delivery.

Want to check available dimensions before ordering?

Visit our Website

Flood protection for condo buildings, hotels and commercial properties

Protecting one home is one job. A building is another: lobbies, parking garages, elevator lobbies, ground-floor units and guest rooms. Board, property manager or owner, the questions are the same.

A condominium in Naples, Florida, with a FlowStop barrier fitted in every ground-floor doorway
A condominium in Naples, Florida: a barrier in every ground-floor doorway.

No permits, no closed rooms, no downtime

Barriers are deployed when water is coming and stored the rest of the year. Your own staff can put them up in a couple of hours, right before the storm, so you never close rooms, never turn away guests, and never shut a business down.

10× less leakage than ANSI 2510 allows

No door barrier tested sealed tighter. National Research Council of Canada, 2025, tested with waves and debris. Read the report →

We already protect multi-unit buildings

At Land's End in Treasure Island, Florida, every public area is protected: 12 elevator lobbies, the main lobby and the common spaces. On St. Pete Beach, a beachfront community has every opening protected, because the water comes straight off the beach. We also protect hotels, restaurants and storefronts, where a flooded ground floor is lost nights and lost covers.

We can scope your building from plans and photos

For a building, we can start from the plans, photos and a video walkthrough, without waiting for a site visit. Then we present the result to whoever decides: a board, a property manager, or you.

Preparing a board vote? We'll put together a scoped quote and a 20-minute presentation for your meeting. Deciding on your own? We can start from photos this week.

The dates are already on the calendar.

King tides: Dec 22–25, Jan 20–23. Build time: 3 to 4 weeks. To be protected for the December 22–25 window, order by November 24, 2026.

🔒 Free, no-obligation quote · Takes under 2 minutes